Smart glass installation

1. Before installation, each piece of glass must be inspected. If there are problems such as wrong size, broken corners, scratches, abrasion, or incorrect quantity, please do not install.

2. Remove the garbage residue in the frame, especially the raised hard objects. Even small stones cannot exist.

3. Please install the glass upright, and do not tear off the sealing tape of the glass. After installation, put on neutral glass glue.

Wiring instructions for smart glass

Many people are worried about the installation method of this new type of glass. In fact, his way of mixing is no different from ordinary glass. The only difference is that smart glass needs to be powered to be used. First of all, we need to note that smart glass cannot be directly connected to the voltage commonly used in your home. A transformer must be used to convert the voltage before it can be connected to the glass wire. The following is a conventional wiring instruction diagram of smart glass.

Detect

After the smart glass is installed, please use the remote control to check whether it can work normally. If an abnormality is found, the reasons can be investigated one by one according to the following steps: 

1. Check whether the current circuit breaker is normal, otherwise, reset or replace the fuse.

2. Check whether the input end of the power supply and the wire connecting the wall socket and the power supply are normally energized. 

3. Check whether the socket on the wall is energized normally, otherwise it must be replaced.

If the above operations are correct, the single smart glass still cannot work normally, please contact your supplier for professional advice.